Polyethylene Heat Shrinking Tape For The Pipeline Anti Corrosion
Packaging: carton + pallet
Delivery time: 7-15 days
Production capacity: 300 tons/month
Minimum order quantity: 100-500 rolls
Product Description
Polyethylene Heat Shrinking Tape For The Pipeline
Polyethylene Heat Shrinking Tape for the Pipeline Anti Corrosion is a wrap around radiation cross linked tape designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
The epoxy primer should applied to the prepared pipe surface then heat shrinkable tape is immediately wrapped around the joint over the wet epoxy.
Then center the closure patch on the overlap region.
Product Composition
The pipeline heat shrink tape consists of three layers, primer layer, adhesive layer, film backing.
Primer: Liquid epoxy, solvent free two component.
Adhesive: High shear strength copolymer adhesive
Film backing: Radiation cross linked. High density polyethylene
Specifications
Property |
Test Method |
Typical Value |
Application temperature |
|
80ºC |
Operating Temperature |
|
Up to 85ºCB |
Backing |
|
|
Tensile Strength |
ASTM D638 |
3000 psi |
Elongation |
ASTM D638 |
550% |
Hardness, ShoreD |
ASTM D2240 |
50 |
Volume Resistivity |
ASTM D257 |
1 x 1016Ω-cm |
Dielectric Strength |
ASTM D149 |
20 kv/mm |
Water Absorption |
ASTM D570 |
< 0.05 |
Adhesive |
|
|
Softening Point |
ASTM E 28 |
120ºC |
Lap Shear |
EN 12068 |
130 N/cm²@23ºC |
ASTM D1002 |
245psi@23ºC |
|
Installed Sleeve |
|
|
Peel Strength |
EN 12068 |
50N/cm @ 23ºC |
Impact Resistance |
EN 12068 |
pass |
Indentation Resistance |
EN 12068 |
pass |
Cathodic Disbondment (30days) |
ASTM G42 |
8mm.rad.@23ºC |
Dimensions
Dimension |
Range |
Width |
Up to 800mm |
Backing Thickness |
0.7-1.5mm |
Adhesive thickness |
0.8-2.0mm |
Length |
10m, 15m & 30m |