The quality inspection of the Hot Shrinkable Tape should be carried out one by one, and the surface of the Hot
Shrinkable Tape should be smooth and smooth without wrinkles or bubbles. The corners of both ends of the
slope are closely bonded to the heat-shrinkable sleeve. No gap. There is no carbonization on the surface. The
hot - shrinkage zone flows out uniformly to the hot - melt adhesive. The spark leak detector was used to check
the pinhole one by one at the patch. Leak detection voltage 15Kv. If there are needle holes. The mouth should
be refilled. The adhesion of antiseptic heat shrinkable belt should meet the requirements.
When the temperature of the tube is about 25 degrees, the peel strength should not be less than 50N/cm
After heating, formed corrosion protection seal
Strong backing provides outstanding waterproofing effect
High chemical resistance. resists impact, abrasion and ultraviolet light.
Excellent resistance against cathodic disbondment, dielectric breakdown.
Tensile Strength:35 N/cm
Adhesion Strength to pipe:30 N/cm
Application temperature: -10 -60 ℃
Temperature resistance:-50 ℃ - 80℃
Shelf Life: 12 months
Other Products Recommendation
Pipe Repair Tape,PP Anti-corrosion Tape,Gtc Tape,Polypropylene Tape,Corrosion Protection Tape.
Looking for ideal Hot Shrinkable Adhesive Tape Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Hot Shrinkable Corrosion Adhesive Tape are quality guaranteed. We are China Origin Factory of Hot Shrinkable Corrosion Tape. If you have any question, please feel free to contact us.
Product Categories : Polyken Pipe Coating System > Polyken Hot Applied Shrinkable Tape