Hot Shrinkable Anti-Corrosion Pipe Repair Tape

Description

The polyethylene layer of the joint should be polished to rough surface. The end part is treated with groove.

The end of slope Angle is treated with groove. The slope Angle is not greater than 30 degrees. Then use the

flame heater to preheat the patch. The lap width of Hot Applied Shrinkable Tape and polyethylene anti-

corrosion layer should not be less than 100mm. If the humidity is greater than 85% or it rains, snow days

should stop construction.

After heating, formed corrosion protection seal

Strong backing provides outstanding waterproofing effect

High chemical resistance. resists impact, abrasion and ultraviolet light.

Excellent resistance against cathodic disbondment, dielectric breakdown.

Simple Application

Properties

Tensile Strength:35 N/cm

Elongation:400%
Adhesion Strength to pipe:30 N/cm
Application temperature: -10 -60 ℃
Temperature resistance:-50 ℃ - 80℃
Shelf Life: 12 months

Other Products Recommendation

Aluminum Flashing Tape,Butyl Tape,Pipe Wrap Tape,Pipe Wrapping Tape,Pp Woven Tape.

Looking for ideal Hot Shrinkable Pipe Repair Tape Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Hot Shrinkable Anti-Corrosion Repair Tape are quality guaranteed. We are China Origin Factory of Hot Shrinkable Corrosion Pipe Repair Tape. If you have any question, please feel free to contact us.

Product Categories : Polyken Pipe Coating System > Polyken Hot Applied Shrinkable Tape