Anti-corrosion heat shrinkable sleeve or winding with the quality inspection of repairing should inspect
appearance, anti-corrosion heat shrinkable sleeve or winding belt surface should be smooth and flat without
buckling without bubbles. Slope Angle on both ends with heat shrinkable sleeve joint. No gap. Surface without
carbonization phenomenon. The heat shrinkable sleeve flows out uniformly to the hot melt adhesive. The spark
leak detector was used to check the pinhole one by one at the patch. The leakage voltage was 15Kv. If a needle
hole appears, the mouth should be refilled. The adhesion of the anti-corrosion heat shrinkable sleeve should
meet the requirements. The stripping strength should not be less than 50N/cm when the temperature of the pipe
body is around 25 degrees
After heating, formed corrosion protection seal
Strong backing provides outstanding waterproofing effect
High chemical resistance. resists impact, abrasion and ultraviolet light.
Excellent resistance against cathodic disbondment, dielectric breakdown.
Tensile Strength:35 N/cm
Adhesion Strength to pipe:30 N/cm
Application temperature: -10 -60 ℃
Temperature resistance:-50 ℃ - 80℃
Shelf Life: 12 months
Other Products Recommendation
Pp Woven Tape,Pvc Insulation Tape,Waterproof Tape,Visco-Elastic Tape,Adhesive Primer.
Looking for ideal PE Heat Shrinkable Sleeve Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the PE Heat Shrinkable Protection Sleeve are quality guaranteed. We are China Origin Factory of PE Heat Shrinkable Anti-corrosion Sleeve. If you have any question, please feel free to contact us.
Product Categories : Polyken Pipe Coating System > Polyken Hot Applied Shrinkable Tape