Joint Tape Description
Tape solution when the temperature must be above 5 ℃, anticorrosive coating construction should be
conducted in more than 5 ℃. (experience prove that tie belt is in the low temperature - 30 ℃ for construction,
but to ensure that the solution temperature.) When the weather was cold, environmental temperature under
10 ℃ or start wrapping tape rubber hard, in order to keep the tape has good bond strength, remove water
vapor on the surface of the steel tube at the same time, appropriate USES burner tube heated surface
(when necessary need to bake each roll of tape volume header), in order to make sure.
We also production Coating Masking Tape,Butyl Rubber Tape,Butyl Tape,Gas Pipe Tape,Pe Tape.
Backing : PE film
Adhesive : Bitumen Adhesive
Total tape thickness in mils:1.0mm
Tape width in inches:2"(50mm),4"(100mm),6"(150mm)
Tape roll length in feet:50ft(15M),100ft(30M)
Other Name:Bitumen Self-Adhesive Tape
Looking for ideal PE Bitumen Tape
Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the PE Bitumen Repair Tape are quality guaranteed. We are China Origin Factory of PE Pipeline Repair Tape
. If you have any question, please feel free to contact us.
Product Categories : Pipe Anticorrosion Materials > Pipe Joint Wrapping Tape