Joint Tape Description
Using the proper mechanical or manual tools, in a good primer on the pipe of wrapping tape, according to the
joint requirements to ensure that the adhesive tape and pipe tilt Angle and the tension, try your best to increase
the belt tension, to wrap, no gap, really ensure the lap joint Angle, avoid wrinkling. The lap joints of the inner
and outer belts shall be staggered. When wrapping, the edge of adhesive tape should be parallel, not twist and
fold, the end of tape should be pressed, so that it does not tilt up.
Backing : PE grey film
Adhesive : Butyl Rubber
Total tape thickness in mils:0.5mm,0.7mm,0.8mm,1.0mm,1.4mm,2.0mm
Tape width in inches:2"(50mm),4"(100mm),6"(150mm)
Tape roll length in feet:50ft(15M),100ft(30M)
We also production Insulation Adhesive Tape,Cold Applied Tape,Bitumen Tape,Polyethylene Tape,Butyl Tape.
Looking for ideal PE Pipe Anti-corrosion Grey Tape Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the PE Pipe Protection Grey Tape are quality guaranteed. We are China Origin Factory of PE Pipe Joint Protection Grey Tape. If you have any question, please feel free to contact us.
Product Categories : Pipe Anticorrosion Materials > Pipe Joint Wrapping Tape