Joint Tape Description
Polyethylene blowing film was used as the base material. After corona treatment, toluene was applied to dissolve
the natural rubber gel. After solvent evaporation, the residual film was used to make coated cold wrapping tape.
This kind of tape production process is relatively simple, less investment in equipment, with the advantages of
low cost. But because of its limited production technology and selection of material, there are often blown film,
low intensity, corona treatment time is limited, natural rubber aging metamorphism, with latex coating rubber is
very thin and the adhesion strength of the basement membrane of small, low peel strength, and both sides often
appear degumming glue phenomenon.
Backing : PE yellow film
Adhesive : Butyl Rubber
Total tape thickness in mils:0.5mm,0.7mm,0.8mm,1.0mm,1.4mm,2.0mm
Tape width in inches:2"(50mm),4"(100mm),6"(150mm)
Tape roll length in feet:50ft(15M),100ft(30M)
We also production Rubber Coating Tape,Waterproof Tape,Petrolatum Tape,Adhesive Primer,
Looking for ideal Pipe Joint Butyl Rubber Tape
Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Pipe Joint Corrosion Protection Tape
are quality guaranteed. We are China Origin Factory of Pipe Joint Protection Yellow Tape. If you have any question, please feel free to contact us.
Product Categories : Pipe Anticorrosion Materials > Pipe Joint Wrapping Tape