2021-01-25
The POLYKEN® 942&955 System is a multilayer coating system designed for the corrosion protection of pipelinesoperating in highly corrosive environments and exposed to high mechanical stresses that may be present particularly on large diameter pipes. The system consists of POLYKEN®1027 liquid adhesive, POLYKEN® 942 three-ply anti-corrosion inner layer and POLYKEN® 955 mechanical outer layer and is fully certified to the DIN 30672 and EN12068 standards. The 3-ply adhesive system produces a strong cohesive bond to the primed steel surface, at the spiral overlap and to the mechanical outer layer. The tough mechanical properties of the outer layer provide protection to the pipes during handling and installation.
- Fully amalgamating overlapping areas Forming a sleeve-type coating - Impermeable to oxygen and moisture - Resistant to soil stress Superior in-ground performance -Long-term in-ground performance | -Uniform coating thickness Plant coating quality with in-situ application -Low cathodic protection-current requirements Saving cost over the life of the pipeline -Compatible with all pipe diameters and generic plant coating systems
|
| Inner-3ply POLYKEN 942-32 | POLYKEN 955-20 |
Backing : | 12mil(0.30mm) | 15mil(0.381mm) |
Adhesive Inner Layer : | 12mil(0.30mm) | 5mil(0.127mm) |
Adhesive Outer Layer: | 8mil(0.20mm) |
|
Total Thick | 0.80mm | 0.508mm |
Properties
UNIT | TEST METHOD | Inner layer-3ply tape | |
POLYKEN 942-32 | |||
Total Thickness | mil | ASTM D 1000 | 32mil(0.8mm) |
Tensile strength | N/cm | ASTMD1000 | 112 |
Elongation at break | % | ASTMD1000 | 650 |
Peel strength to primed steel at 23 ℃ at 50℃ | N/cm | EN 12068 Annex C |
15 1.3 |
Peel strength tape to tape at 23 ℃ at 50℃ | N/cm | EN 12068 Annex B |
25 3.5 |
Peel strength layer to layer -Inner to Inner -Outer to Inner -Outer to Outer |
N/mm | EN 12068 |
1.5 2.0 0.5 |
Dielectric strength | Kv/mm | ASTMD149 | 32 |
Insulation Resistance | Ohm.m² | EN 12068 | 1012 |
Water Vapor Transmission | g/ m2 /24h | ASTM E 96 | 0.1 |
Water Absorption | % | ASTM D 570 | 0.08 |
Impact resistance at 23° | J | EN 12068 | 18 |
Cathodic disbandment at 23°c at 50°c | mm | 15 30 | |
Lap shear strength at 50℃ | N/mm2 | EN 12068 | 0.05 |
POLYKEN® 942 and 955 coating tapes are in roll form.
Eg.: POLYKEN® 942-32 4"×100'
Product Model No. | Standard ordering options | |
32 | Total tape thickness in mils | 32mils(0.8mm) |
BLK | Tape backing color | Black (BLK) |
4 | Tape width in inches | 2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) |
100 | Tape roll length in feet | 50ft(15M)100ft(30M),200ft(61M) |
Eg.: POLYKEN 955-20 BLK 4"×100'
POLYKEN955 | Product Model No. | Standard ordering options |
20 | Total tape thickness in mils | 15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) |
BLK | Tape backing color | Black(BLK),White (WHI) |
4 | Tape width in inches | 2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) |
100 | Tape roll length in feet | 100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) |
***Special Roll Size can be customized .
Material Calculation Formula :
(Width of Coating in inches) ×(Area of pipe in square feet)*
----------------------------------------------------------------------------= Squares **of Coating Required
(Width of coating in inches-Overlap in inches) ×100
*Area of pipe in square feet=(Diameter in inches)/12×3.1416×(Length in feet)
**One square=One hundred square feet=9.29 square meters
(Width of Coating in mm) ×(Area of pipe in square meter)*
-------------------------------------------------------------------------------=Square meter of Coating Required
(Width of coating in mm-Overlap in mm)
*Area of pipe in square meter=(Diameter in mm)/1000×3.1416×(Length in meter)Send Inquiry
Mr. Morgan Chen
Tel:86-0537-6400111
Fax:86-0537-6400222
Mobile Phone:+8618863769877
Email:chinapipetape@163.com
Address:No.3 Jiamei Road ,Jiaxiang Industry Park, Jining, Shandong
Related Products List
Mobile Site